top of page


SILVER EXTERIOR PACKAGE
Beyond the Wash: A Lasting Shine
Silver Exterior Detail Package Process This package is a comprehensive exterior detail that goes beyond a standard wash to truly restore and protect your vehicle's finish. Here is a step-by-step breakdown of each process:
1. Foam Cannon Pre-Soak: A thick, luxurious layer of snow foam is applied to the entire vehicle. This pre-wash step uses specialized soap to safely loosen and encapsulate dirt, road film, and grime before any physical contact is made with the paint, drastically reducing the risk of scratching and swirling during the hand wash phase.
2. Pressure Wash Road Film: After the foam has dwelled for a few minutes, a powerful stream of water from a pressure washer is used to rinse the vehicle. This step blasts away the loosened dirt and foam, performing a touchless clean that removes the majority of contaminants without scrubbing.
3. Hand Wash (2-Bucket Method): This is the contact wash phase, using two separate buckets—one for soapy water and one for clean rinse water. This method is the gold standard for a scratch-free wash. The wash mitt is dunked in the soapy water, used to clean a section of the car, then rinsed in the clean water bucket before being re-loaded with soap. A grit guard at the bottom of the rinse bucket traps dirt, preventing it from being reintroduced to the paint.
4. Topped off with a Premium Spray Wax: After the paint is thoroughly decontaminated, a premium spray wax is applied. This final step provides a durable layer of protection. The spray wax enhances the paint's gloss and creates a hydrophobic layer.
PLATINUM EXTERIOR PACKAGE
The Showroom Finish
Platinum Exterior Package Process Breakdown Here is a step-by-step breakdown of the individual processes included in our Silver Exterior Package:
1. Foam Cannon Pre-Soak & Pressure Wash: We begin by covering the vehicle in a thick layer of foam to safely loosen dirt and road film before a thorough pressure wash removes the grime without making contact with the paint.
2. Hand Wash: We then meticulously hand wash the vehicle using a two-bucket method, the industry standard for a safe, scratch-free clean.
3.Decontaminate: We use both a clay bar and a chemical iron remover to deeply clean the paint, removing embedded contaminants that a normal wash can't.
4. Polish & Sealant: The paint is machine polished to remove light swirls and enhance gloss. It's then protected with a 9-month ceramic sealant, which repels water and makes future cleaning much easier.
5. Detailed Finishing Touches: We meticulously clean the wheels and tires and apply a no-sling dressing. We also clean the door jambs and all exterior windows for a complete, professional finish. Additional Steps Exhaust Tips: Exhaust tips are cleaned and polished to a brilliant shine. Exterior Plastics: All exterior black plastics are treated and restored to a deep black finish. Rubber Seals: We clean and condition the rubber seals on all doors and the trunk.
bottom of page